华东师范大学学报(自然科学版) ›› 2018, Vol. 2018 ›› Issue (1): 128-134,145.doi: 10.3969/j.issn.1000-5641.2018.01.012

• 物理学与电子学 • 上一篇    下一篇

光信号自动拾取丝扫描测量系统设计

邵中尉1, 韩定定1, 龚培荣2   

  1. 1. 华东师范大学 信息科学技术学院, 上海 200241;
    2. 中国科学院 上海应用物理研究所, 上海 201204
  • 收稿日期:2016-12-27 出版日期:2018-01-25 发布日期:2018-01-11
  • 通讯作者: 韩定定,女,教授,博士生导师,研究方向为复杂网络与智能信息处理.E-mail:ddhan@ee.ecnu.edu.cn. E-mail:ddhan@ee.ecnu.edu.cn
  • 作者简介:邵中尉,男,硕士研究生,研究方向为束线光束工程.E-mail:1575345317@qq.com.

Beam automatic detection wire scanner system design

SHAO Zhong-wei1, HAN Ding-ding1, GONG Pei-rong2   

  1. 1. School of Information Science and Technology, East China Normal University, Shanghai 200241, China;
    2. Shanghai Institute of Applied Physics, Chinese Academy of Sciences, Shanghai 201204, China
  • Received:2016-12-27 Online:2018-01-25 Published:2018-01-11

RichHTML

7

PDF

501

摘要： 为了提高同步辐射丝扫描探测器的测量分辨率与缩短数据处理时间，设计了光信号自动拾取丝扫描测量系统.该系统采用多进程优先级机制管理采样过程，对信号进行降噪处理后使用Allen函数对信号幅度变化特征进行放大，长短时平均法与赤池准则结合拾取光信号，自动确定拟合区间，同时采用能量变化法对高斯拟合参数初值进行估测.经实验验证，该测量系统拾取光信号位置准确，可有效提高丝扫描探测器的测量分辨率，缩短数据处理用时.

关键词: 同步辐射, 丝扫描, 信号处理, 分辨率

Abstract: A beam automatic detection wire scanner system was developed to improve the measurement resolution and shorten the data processing time. The system managed the sampling process by multi-process priority mechanism, using Allen function to amplify signal variation characterization after signal processing. Fitting range was recognized based on short time average/long time average and Akaike information criterion, and fitting parameter initial values were determined by energy gradient curve. It is found that the system detects beam accurately and improves the measurement resolution and shortens data processing time.

Key words: synchrotron radiation, wire scanner, signal processing, resolution

中图分类号: