华东师范大学学报（自然科学版） >

2018 , Vol. 2018 >Issue 1: 128 - 134,145

DOI: https://doi.org/10.3969/j.issn.1000-5641.2018.01.012

物理学与电子学

光信号自动拾取丝扫描测量系统设计

  • 邵中尉 ,
  • 韩定定 ,
  • 龚培荣
展开
  • 1. 华东师范大学 信息科学技术学院, 上海 200241;
    2. 中国科学院 上海应用物理研究所, 上海 201204
邵中尉,男,硕士研究生,研究方向为束线光束工程.E-mail:1575345317@qq.com.

收稿日期: 2016-12-27

  网络出版日期: 2018-01-11

收起

Beam automatic detection wire scanner system design

  • SHAO Zhong-wei ,
  • HAN Ding-ding ,
  • GONG Pei-rong
Expand
  • 1. School of Information Science and Technology, East China Normal University, Shanghai 200241, China;
    2. Shanghai Institute of Applied Physics, Chinese Academy of Sciences, Shanghai 201204, China

Received date: 2016-12-27

  Online published: 2018-01-11

Fold

摘要

为了提高同步辐射丝扫描探测器的测量分辨率与缩短数据处理时间，设计了光信号自动拾取丝扫描测量系统.该系统采用多进程优先级机制管理采样过程，对信号进行降噪处理后使用Allen函数对信号幅度变化特征进行放大，长短时平均法与赤池准则结合拾取光信号，自动确定拟合区间，同时采用能量变化法对高斯拟合参数初值进行估测.经实验验证，该测量系统拾取光信号位置准确，可有效提高丝扫描探测器的测量分辨率，缩短数据处理用时.

关键词： 同步辐射; 丝扫描; 信号处理; 分辨率

本文引用格式

邵中尉 , 韩定定 , 龚培荣 . 光信号自动拾取丝扫描测量系统设计[J]. 华东师范大学学报（自然科学版）, 2018 , 2018(1) : 128 -134,145 . DOI: 10.3969/j.issn.1000-5641.2018.01.012

Abstract

A beam automatic detection wire scanner system was developed to improve the measurement resolution and shorten the data processing time. The system managed the sampling process by multi-process priority mechanism, using Allen function to amplify signal variation characterization after signal processing. Fitting range was recognized based on short time average/long time average and Akaike information criterion, and fitting parameter initial values were determined by energy gradient curve. It is found that the system detects beam accurately and improves the measurement resolution and shortens data processing time.

Key words： synchrotron radiation; wire scanner; signal processing; resolution

参考文献

[1] KOCSIS M, FAJARDO P, GRENOBLE E. High spatial resolution X-ray beam position monitor[C]//IEEE Nuclear Science Symposium Conference Record, 2005. IEEE, 2005, 3:1223-1225.
[2] KREJCIK P, CAMPELL M, D'EWART J, et al. Performance of the new fast wire scanner at the LCLS[C]//Proceedings of the 4th International Beam Instrumentation Conference (IBIC2015). 2016:547-549.
[3] 龚培荣, 徐慧超, 周剑英, 等. 上海光源光束线前端区XBPM探测器[J]. 核电子学与探测技术, 2015, 35(5):281-286.
[4] 龚培荣, 何迎花, 周剑英. 丝扫描探测器测量同步辐射X光的位置和尺寸[J]. 核电子学与探测技术, 2016, 36(3):274-278.
[5] ALLEN R V. Automatic earthquake recognition and timing from single traces[J]. Bulletin of the Seismological Society of America, 1978, 68(5):1521-1532.
[6] ALLEN R. Automatic phase pickers:Their present use and future prospects[J]. Bulletin of the Seismological Society of America, 1982, 72(6B):S225-S242.
[7] BAER M, KRADOLFER U. An automatic phase picker for local and teleseismic events[J]. Bulletin of the Seismological Society of America, 1987, 77(4):1437-1445.
[8] EARLE P S, SHEARER P M. Characterization of global seismograms using an automatic-picking algorithm[J]. Bulletin of the Seismological Society of America, 1994, 84(2):366-376.
[9] MAEDA N. A method for reading and checking phase times in auto-processing system of seismic wave data[J]. Zisin, 1985, 38(3):365-379.
[10] MARQUARDT D W. An algorithm for least-squares estimation of nonlinear parameters[J]. Journal of the Society for Industrial and Applied Mathematics, 1963, 11(2):431-441.
Options
文章导航

/

〈 〉