Journal of East China Normal University(Natural Science) >

2015 , Vol. 2015 >Issue 1: 142 - 150

DOI: https://doi.org/10.3969/j.issn.1000-5641.2015.01.018

Article

The multi-object optimization of a spatial cable-driven parallel manipulator

  • CHEN Jie ,
  • SUN Xiao-Long ,
  • MO Wei
Expand
  • 1. School of Electro-Mechanical Engineering, Xidian University, Xi’an 710071, China;
    2. Changjiang Computer Group Corporation, Shanghai 200001, China

Received date: 2014-06-01

  Online published: 2015-03-29

Fold

Abstract

This paper investigates the multi-object optimization for a spatial 6-DOF (degree-of-freedom) cable-driven parallel manipulator. The optimization based on an NN (neural network)-genetic algorithm was carried out respectively with regarded to workspace volume, the minimum tension and global dexterity index, then three groups of satisfactory solutions were obtained. Furthermore, the weight coefficients for the multi-object optimization model were gained through the grey clustering method. The results show that the NN-genetic algorithm is effective for the structural optimization and can provide a useful reference for the optimal design of similar manipulators

Key words： cable-driven parallel manipulator; multi-object structural optimization; neural network; genetic algorithm; grey clustering method

Cite this article

CHEN Jie , SUN Xiao-Long , MO Wei . The multi-object optimization of a spatial cable-driven parallel manipulator[J]. Journal of East China Normal University(Natural Science), 2015 , 2015(1) : 142 -150 . DOI: 10.3969/j.issn.1000-5641.2015.01.018

References

TANG X Q. An overview of the development for cable-driven parallel manipulator [J/OL]. Advances in Mechanical Engineering, 2014 (2014): [2014-05-01]. http://dx.doi.org/10.1155/2014/823028.
苏宇, 仇原鹰, 王龙, 等. 高速绳牵引并联摄像机器人冗余驱动力优化求解 J]. 西安电子科技大学学报, 2014, 41(2): 90-96.
YING M, AGRAWAL S K. Design of a cable-driven arm exoskeleton (CAREX) for neural rehabilitation [J]. IEEE Transactions on Robotics, 2012, 28(4): 922-931.
BORGSTROM P H, BORGSTROM N P, STEALEY M J, et al. Design and implementation of NIMS3D, a 3-D cabled robot for actuated sensing applications [J]. IEEE Transactions on Robotics, 2009, 25(2): 325-339.
TANG X Q, LIU Z H, SHAO Z F, et al. Self-excited vibration analysis for the feed support system in FAST [J]. International Journal of Advanced Robotic Systems, 2014, 11(63): 1-13.
GUSTAVO R Z, ANTONIO J N, Francisco L, et al. A survey of multi-objective metaheuristics applied to structural optimization [J]. Structural and Multidisciplinary Optimization, 2014, 49(4): 537-558.
LI Y M, XU Q S. GA-Based multi-objective optimal design of a 3-D of cable-driven parallel manipulator [C]//Proceedings of the 2006 IEEE International Conference on Robotics and Biomimetics. [S.l]: [s.n], 2006:1360-1365.
JAMWA P K, XIE S Q, AW K C, et al. Multi-criteria Optimal Design of Cable Driven Ankle Rehabilitation Robot [M]//Mobile Robots-State of the Art in Land, Sea, Air, and Collaborative Missions. New Zealand: Intech Press, 2009.
肖红军. 平面完全约束绳牵引并联机器人的多目标优化~[J]. 西安工程大学学报, 2010, 24(5): 608-613.
BAHRAMI A, BAHRAMI M N. Optimal design of a spatial four cable driven parallel manipulator [C]//Proceedings of the 2011 IEEE International Conference on Robotics and Biomimetics. [S.l]: [s.n], 2011:2143-2149.
郑亚青. 绳牵引并联机构若干关键理论问题及其在风洞支撑系统中的应用研究 [D]. 泉州: 华侨大学, 2004.
郭海丁,  路志峰. 基于\,BP\,神经网络和遗传算法的结构优化设计 [J]. 航空动力学报, 2003, 18(2): 216-220.
段玉波, 王磊,  李飞, 等. 基于遗传算法的前馈神经网络结构优化 [J]. 系统仿真技术, 2013, 9(2): 170-174.
李小平, 刘海兰, 芮延年. 基于灰色聚类理论斜齿圆柱齿轮传动多目标优化设计的研究 [J]. 系统仿真技术, 2004, 28(1): 25-27.
Options
Outlines

/

〈 〉